Home » Posts tagged 'water softeners are not required to be connected to a'

Tag Archives: water softeners are not required to be connected to a

Install A Water Softener

Hard water is the main cause for death of appliances, water boilers, and kettles. Limescale removal can be a difficult task. It is often very hard to get rid of. Descaling is easiest if you don’t descale. There are many filters available for water. Installing a water softeners benefits at the main water source to your property will give you the best protection against limescale buildup in your appliances and plumbing. Depending on the size and type of household, water softeners will cost you between 300 and 700 pounds.

Planning Your Installation. Respect the water bylaws. Make sure you only have one water main supply. Also, ensure there is sufficient space for salt filling at later stages. To check the water pressure, locate and connect to the main water supply.

Water Pressure Test. A pressure test is necessary. Low or high water pressure could cause softener damage, or even complete failure. While the softener can be tested under pressure, it is recommended you install a pressure limiter to reduce your water pressure to 5 bar (70psi). Additionally, any water appliance should have a leak-controller.